Rusatom MetalTech LLC offers titanium pipes, wires, forgings, bars, refractory compounds, radiation- and heat-resistant wires for the nuclear power industry.

• Radiation- and Heat-Resistant Wires

Designed for operation at elevated temperatures (up to 450 °C) in conditions of high-intensity neutron fluxes.

• Titanium Products

Used as a structural material for nuclear power facilities under construction to manufacture condenser tubes, reactor cooling circuit pipelines, steam turbine working blades, and heat-exchange equipment. 

• Hafnium Oxide

Used for production of thermal barrier coatings.

• Forgings, Bars, Carbides, Nitrides, Borides of Zirconium and Hafnium.

Used as components of power plants.

Rusatom Metal Tech LLC offers a wide range of products of the highest quality from powders to cabling and wiring products.

• Nickel Electrolytic Powders

Used for restoration of wear-resistant coatings on aircraft engine parts by plasma spraying.

• Titanium Pipes

Used as the main structural material for manufacturing engines, hydraulic systems, and air conditioning systems.

• Titanium Wire

Used in welding of titanium products.

• Titanium Forgings, Bars

Used for manufacturing engine casings, turbine blades and disks.

• Radiation- and Heat-Resistant Wires

Used as lengtheners for piezoresistors (sensors) for aircraft engines

• Extra Thin Coated Wires

Used in shielding metal braids to protect on-board cables and harnesses from electromagnetic fields. Installed in high-performance spacecraft antennas. Used in rocket engines with operating temperatures up to 1,050 °C.

• Tantalum

Used in the production of electronic components, mainly capacitors and some high-power resistors, in the form of metal powder.

• High-Melting Compounds

Used for protective coatings and heat-resistant alloys for manufacturing parts of ultrahigh-speed airplanes, reactor tubes of space rockets.

Rusatom Metal Tech LLC has a wide range of high-quality products from titanium and its alloys, which are used in shipbuilding.

• Titanium Alloys

Titanium alloys are used in construction of ships and offshore structures (equipment for submarines, surface ships, offshore platforms for oil and gas extraction from the ocean floor).

• Titanium Pipes

Used for manufacturing water intake pipelines, pipelines of fire-fighting systems.

• Titanium Bars and Forgings

Used for manufacturing screw propellers and shafts.

Rusatom Metal Tech LLC offers cabling and wiring products and permanent rare-earth magnets for the power engineering industry, including hydropower and wind-power engineering.

• Coated and Uncoated Thin Wires

Used in the alternative power engineering for manufacturing solar panels, hydroelectric generator windings, geothermal heat pumps, and power cables.

• Permanent Rare-Earth Magnets of the Neodymium-Iron-Boron System

They are an important component of wind turbine generators and are used in electric vehicle motors.

Rusatom Metal Tech LLC supplies precision cast products, high-melting compounds, and titanium pipes for the oil and gas and petrochemical industry.

• Precision Investment Casting Technology

Used in the operation of pumps.

• Zirconium and Hafnium Carbides, Nitrides, Borides

Used in drill bits to equip drill rods for coal and rock with a tensile strength of up to 40 MPa.

Rusatom Metal Tech LLC presents a wide range of miscellaneous products for metallurgical industry.

• Metallic Electrolytic Calcium

Used as an oxide reducing agent in the metallurgy of high-melting and rare metals, as an alloying element and refining reagent in non-ferrous metallurgy.

• Calcium Injection Wire for Secondary Metallurgy

Used for treatment of metallurgical melts in order to improve technological properties of liquid steel and increase consumer characteristics of steel products for ordinary and essential purposes.

• Niobium

Used for manufacturing high-strength low-alloy steels and heat-resistant alloys.

• Zirconium Iodide

Used for building titanium alloys.

• Zirconium and Hafnium Carbides, Nitrides, Borides

Components of heat-resistant and high-melting alloys used in aviation and rocket engineering.

Rusatom Metal Tech LLC offers a diverse range of products for the medical industry from traumatology and orthopedics to dentistry.

• Titanium Implants

Used for periosteal and intraosseous osteosynthesis.

• Ceramic Dental Implants

Used in dentistry for embedding in the bone tissue of the jaw with subsequent fusion (osseointegration) for prosthetics and for achieving the best aesthetic results. 

• Yttrium-Stabilised Nano-Dispersed Zirconia Powder

Used for production of dental disks.

• Precision Cast Adjuster Modules

Used as the final adjustment of a fitted denture.

Rusatom Metal Tech LLC supplies a wide range of products for the mechanical engineering industry from wires to hard alloys.

• Precision Cast Bushings

Used in the operation of machine tools and electromotors.

• Contact Wires

Capable of supporting train speeds of up to 450 km/h.

• Hard Alloys

Used in the manufacture of metal cutting, drilling, and mining equipment.

The product line of Rusatom Metal Tech LLC includes hafnium, coated and uncoated thin wires based on copper-niobium alloy, which are used in microelectronics.

• Hafnium

Used to produce resistive films with special properties and in the production of transistors.

• Coated and Uncoated Thin Wires

Used for interconnections.